Adequate pressure stability of the underlay is very important, particularly when laying click laminate floors. Minimum EPLF requirement: CS ≥ 10 kPa
Accessories
Insulation Underlay Wood 5.0
Thickness:
5 mm
2.98€/m2
In stock
One
pack contains: 6.99 m2 Price per pack: 20.83€
Please fill needed square meters or packs:
OR
Packs required
-- (--m2)
m2pack
There are only 000 packages in stock, you need 111.
### needed were rounded up to fit complete packs.
Wood fibres
This insulation board made of wood fibres is conditionally suitable for both underfloor heating and thermal insulation (R-Value for the total floor construction ‹ 0,15 m2 K/W). Due to the high wood content, a PE foil must be placed underneath as moisture protection when laying on mineral substrates.
 |
Please read the installation guide and available product information, before purchasing and installing. |
Features
Durability
Impact Sound Reduction
Impact sound describes the noises that are heard in rooms below or adjacent. Depending on the material compound used in the underlay, impact sound can be reduced by up to 22 dB. Minimum EPLF requirement: IS ≥ 14 dB
Suitable for uneven floors
The floors are often uneven, especially in old buildings. These irregularities can be levelled out with the right add2 parquet underlay. EPLF requirement: PC ≥ 0.5 mm
Warm underfoot
In times of resource saving, thermal insulation is an important criterion. A properly insulated floor feels warm, even unheated. Underlay requirement: R ≥ 0.075 m2 K/W
Specification
Type
Accessories
Thickness
5 mm
Width
590 mm
Length
790 mm
Pack Pieces
15
Quantity per Pack
6.99 m2
Similar products
Last viewed